Download Firmware Samsung Soundbar Update

Download Firmware Samsung Soundbar Update

Download Firmware Samsung Soundbar Update
first thing u must conect the wifi network than rear speakers for 30 seconds, and then plug them back in. open your Open the SmartThings app on your phone and select the soundbar to access its control menu.and than Tap the 3 vertical dots in the top right corner of the screen.and last Navigate to Information > Firmware Update > Update Now

Download Firmware Samsung Soundbar Update

to update visite this link Samsung Download Center select your product type and then search for your soundbar, or select ENTER MODEL NUMBER to access the support page for your specific soundbar model.

If you find multiple firmware versions, install the newest version. Select DOWNLOAD next to the firmware version to download the compressed file.

When the file has finished downloading, locate it and then unzip the file.

Navigate through the folders until you access the files required for the update. Copy or move the firmware’s files to the root directory of your USB flash drive (make sure the storage capacity is large enough for the files). When you copy or move the files to your USB flash drive, do not place them in a folder. If they are in a folder, the TV will not be able to find the firmware.

Next, connect a USB flash drive containing the firmware update into a USB port of your soundbar while it’s powered off (usually located in the back).

Update the firmware on your Samsung soundbar

Turn on your soundbar using the remote or the Power button directly on the soundbar and then switch to the USB source using the source button.

Note: Your soundbar may not have a USB source. If it doesn’t you can skip this step.

The update will start and your soundbar’s display will flash “UPDATE” during the process.

When the update finishes, the soundbar turns off. Press the Play/Pause button on the remote for 5 seconds. “INIT” will appear on the display and then the soundbar will turn off. This means the update is complete.

Press the Play/Pause button on the remote for 5 seconds. “INIT” will appear on the display and then the soundbar will turn off. This means the update is complete.

Source : https://www.samsung.com/us/support/answer/ANS00082755/

Leave a Comment

Your email address will not be published. Required fields are marked *